Applications

Cell lysis and extraction.

The C-series homogenizers are designed to disrupt cells: bacteria, yeasts, spores. Here is what they do, their limits, and what we check with you before proposing a model.

Principle

Mechanical disruption, under pressure.

The sample, in suspension, is pressurized and then forced through the narrow gap of the valve. The sudden pressure drop, shear and impact against the valve's impact ring break the cell walls. Repeating the pass increases the disruption rate.

Bacteria

E. coli and most bacteria

Lysates for purifying recombinant proteins, enzymes and nucleic acids. E. coli cells break at moderate pressures.

  • E. coli
  • Recombinant proteins
  • Enzymes
Yeasts

Saccharomyces and Pichia

Yeasts have a thicker wall: they need higher pressure and several passes. The manufacturer reports up to three passes to exceed 99 % disruption.

  • S. cerevisiae
  • Pichia pastoris
  • Expression yeasts
Spores

Ganoderma spores

The manufacturer lists the disruption of Ganoderma spores among the uses of the C series, alongside yeasts and E. coli.

  • Ganoderma
  • Thick walls
Disruption rate

A result you measure on your own sample.

The manufacturer reports a disruption rate of 95 to 99 % on yeasts, E. coli and Ganoderma spores. The rate depends on the organism, concentration, pressure and number of passes.

What the manufacturer says

Several passes

The manufacturer's manual calls for at least two passes. For yeast, its tests show up to three passes to exceed 99 %. For E. coli, its datasheets show tests with one or two passes between 800 and 1,800 bar.

What we do

We measure it at your site

During the demonstration, we process your sample at several pressures and numbers of passes. You measure the result with your usual method: microscope counting, optical density or assay of released proteins.

Limits of use

What the C series does not do.

These limits come from the manufacturer's manual. We check them with you before any demonstration.

Unsuitable samples

  • Filamentous or clumping organisms.
  • Dry powders: the sample must be a liquid suspension.
  • Insoluble, abrasive substances, such as titanium dioxide.

Concentration

Dry matter must not exceed 20 % of the suspension. Above that, the sample must be diluted.

Contact

Is your organism suitable?

Describe your sample: we will tell you whether the C series fits, and with which model.