Laboratory · Medium batches
JNBIO JN-2.5C
For regular batches from a few hundred millilitres to a few litres: 2.5 litres per hour at 2,070 bar, with cleaning and sterilization in place.
European launch in preparation
JN homogenizers are being brought into conformity with European regulations. We are already organizing demonstrations in your laboratory and answering your questions; sales will open once this step is complete.
207 MPa
Maximum pressure (2,070 bar)
2.5 L/h
Maximum flow rate (42 ml/min)
5 ml
Minimum volume
< 1 ml
Residual volume
4–6 °C
Bath along the entire path
CIP/SIP
Cleaning and sterilization in place
Use
For regular laboratory batches.
The JN-2.5C processes 500 ml in 12 minutes per pass at maximum flow rate. Cleaning and sterilization in place (CIP/SIP) let you run batch after batch without dismantling the circuit.
- 4–6 °C cooling bath along the entire sample path
- Diamond homogenizing valve, metal seals
- 316L stainless steel wetted parts
- Hydraulic drive: stop and restart without releasing pressure
- Touchscreen and PLC: pressure curve, alarms, 7-day history, password access, emergency stop
- Cleaning and sterilization in place (CIP/SIP)
Options
- Negative-pressure drainage
- In-line filtration
Footprint and installation
What to plan for.
| Main unit (W × D × H) | 560 × 580 × 872 mm |
| Chiller (W × D × H) | 525 × 635 × 870 mm |
| Power supply | 220 V |
| Installation requirements | Full list provided with our proposal |
| Electrical power and weight | Provided with our proposal |
| Warranty | 1 year from acceptance of the installation |