JNBIOJN-Mini Pro
Method development, small batches and scarce samples, from 3 ml.
- In-line cleaning with pressurized water
- Separate machine and chiller, on the bench
- The model we use for demonstrations
Pressure up to 2,070 bar, a 4–6 °C bath along the entire sample path, diamond valve, metal seals, 316L stainless steel wetted parts, touchscreen control. What changes from one model to the next: flow rate, minimum volume and cleaning in place.
JN homogenizers are being brought into conformity with European regulations. We are already organizing demonstrations in your laboratory and answering your questions; sales will open once this step is complete.
Method development, small batches and scarce samples, from 3 ml.
Regular batches from a few hundred millilitres to a few litres.
Batches of several litres, the highest flow rate in our current range.
The table shows the specifications provided by the manufacturer. Values marked "on request" are provided with our proposal.
| Specification | JN-Mini ProBenchtop | JN-2.5CLaboratory | JN-6.0CLaboratory and pilot |
|---|---|---|---|
| Performance | |||
| Maximum pressure | 207 MPa · 2,070 bar | 207 MPa · 2,070 bar | 207 MPa · 2,070 bar |
| Maximum flow rate | 1.5 L/h · 25 ml/min | 2.5 L/h · 42 ml/min | 6 L/h · 100 ml/min |
| Minimum sample volume | 3 ml | 5 ml | On request |
| Residual volume | On request | < 1 ml | On request |
| Time per pass for 500 ml, at maximum flow rate | 20 min | 12 min | 5 min |
| Cooling and circuit | |||
| Cooling bath, entire sample path | 4–6 °C | 4–6 °C | 4–6 °C |
| Homogenizing valve | Diamond | Diamond | Diamond |
| Sealing | Metal seals | Metal seals | Metal seals |
| Wetted parts | 316L stainless steel | 316L stainless steel | 316L stainless steel |
| Drive | Hydraulic | Hydraulic | Hydraulic |
| Cleaning and options | |||
| Cleaning | In-line, with pressurized water | CIP / SIP | CIP / SIP |
| Negative-pressure drainage | On request | Option | On request |
| In-line filtration | On request | Option | On request |
| Control | |||
| Touchscreen and PLC | Yes | Yes | Yes |
| Operation history | 7 days | 7 days | 7 days |
| Password access, emergency stop | Yes | Yes | Yes |
| Power supply | 220 V | 220 V | 220 V |
| Footprint in mm (width × depth × height) | |||
| Main unit | 460 × 650 × 490 | 560 × 580 × 872 | 560 × 580 × 1070 |
| Chiller | 450 × 630 × 600 | 525 × 635 × 870 | 525 × 635 × 870 |
| Electrical power and weight | Provided with our proposal | Provided with our proposal | Provided with our proposal |
Your batches range from a few millilitres to a few hundred millilitres, or your samples are scarce. The machine fits on a bench.
Several hundred millilitres to a few litres, with cleaning and sterilization in place between batches.
Batches of several litres, or an intermediate step before pilot scale.
Torn between two models? A demonstration on your own sample, with the JN-Mini Pro, shows the pressure and number of passes you need. The flow rate you need follows from that.
Tell us the organism, the concentration and your batch volume: we will propose the right model.